Today I’m going to show you how to configure your RG1200 CPE. “The same configuration can also be done on the Tenda AC10 CPE, since the graphical interface is similar,” using Made4Graph’s TR-069.

I recommend that this be done at a workstation using a public IP address, since it will need to be approved. To do this, we’ll need to update some information in your CPE using the TR-069 form, and we don’t want a customer to be left without internet service.

Before beginning the configuration, it is essential that there be no “NAT” of any kind on the network between the CPE and the TR-069 server; if there is, it will compromise TR-069 functionality, as stated in the protocol documentation.

Now that I’ve completed the prerequisites, let’s set up the CPE.

When you access the CPE, go to the Advanced Settingstab, then to TR069.
When you reach the screen shown below, make the following settings:

CWMP Settings:
→ The CWMP button must be enabled
→ The information button must be enabled
→ Information interval = 300
→ ACS URL = http://tr_server_ip:7547
→ ACS username = admin
→ ACS password = admin
→ The “Connection Request Authentication” checkbox must be checked
In the fields below the connection request box, you will be prompted for a username and password; you must use:
→ Username = admin
→ Password = admin
→ Port = 7547

The STUN option can be enabled, but it does not need to be configured; the settings can be left at their default values.

After that, click Save.

Shortly thereafter, the CPE should appear on made4graph, where it will be approved by our team

Some information has been redacted to keep CPE data confidential.

If you still have questions, send us a message, and we’ll help you with your CPE.

Don’t have the TR069 yet?